DD Challenge Pro (Soccer)

Artificial grass is increasingly becoming the accepted solution for soccer matches and training, even at the highest level. Soccer professionals are particularly demanding when it comes to the playing characteristics of artificial grass, which must be as close as possible to those of natural grass.

Building on its vast expertise with non-splitting, monofilament fibers, DD Sports Systems has developed the DD Challenge Pro artificial grass fiber. This fiber will replicate the properties of natural grass more than ever before.

• Improved Performance Levels Maintained for Longer:
Thanks to the new DD Reflex+ Fiber Technology and the non-splitting monofilament fiber, the pitch maintains its playing characteristics for the full lifespan of the pitch.

• No Compacting of the Entire System:
The facts that the fibers spring back into place primarily protects the artificial grass system against compacting, maintaining the optimal level of shock absorption and traction. In addition, this will maintain the pitch’s ability to drain efficiently, thus preventing the pitch from holding water.

• Optimum Pile Recovery Capacity:
Using the DD Reflex+ Fiber Technology* gives the grass fiber excellent pile recovery capacity. Even after undue pressure/trampling, the grass fibers immediately return to their original position.

*Selected additives are incorporated into the basic polymer, the base material of artificial grass.

• Soft Touch:
DD Challenge Pro, with its polyethylene base, gives a fiber that is soft to touch and a pitch that provides a balance between softness and resistance.

• UV-Resistant and Colorfast:
This fiber is equipped with the Fiber Protection System (FPS) which substantially increases its resistance to UV rays and enhances durability and colorfastness.

DD Challenge Pro Technical Specifications*

Description	Reference	Specification
Production Method	DIN 61151	Tufted (Straight), Cutpile
Pile Component	DIN 61151	DD Challenge Pro, Straight Non-Fibrillating Fiber (8 Monofilaments Each 210µ Thickness), 100% Polyolefin, UV Resistant, 12100 dtex
Coating/Secondary Backing	DIN 61151	Waterpervious SBR Latex
Primary Backing	DIN 61151	Polypropylene and Polyester Woven + Fleece
Pile Height Above Backing		40 mm/50 mm/60 mm
Gauge		3/4"

*All mentioned values are within tolerances accepted by the industry. We reserve the right to amend these specifications.